MoRTH changes PUC validity; BS-VI private vehicles get 3 years

·

MoRTH’s amended Rule 115 links PUC validity to emission norm, vehicle age and use. Newer BS-VI private vehicles get three years; older vehicles renew more often.

MoRTH changes PUC validity; BS-VI private vehicles get 3 years

MoRTH has changed the validity schedule for Pollution Under Control (PUC) certificates, linking the renewal interval to a vehicle’s Bharat Stage emission norm, age and whether it is used for private or transport purposes. The change matters because newer BS-VI private vehicles can now go longer between pollution tests, while older and lower-emission-standard vehicles face shorter renewal windows.

The Ministry of Road Transport and Highways amended sub-rule (7) of Rule 115 of the Central Motor Vehicles Rules, 1989. The Central Motor Vehicles (Sixteenth Amendment) Rules, 2026, were notified through Gazette notification G.S.R. 991(E), dated 13 Nov 2026, and came into force on publication in the Official Gazette, reported as 16 Nov 2026 by NDTV Profit. A PIB release dated 19 Nov summarised the revised schedule.

Key takeaways

  • BS-VI private, non-transport vehicles up to six years from first registration get a PUC validity of three years.
  • BS-VI transport vehicles up to six years get two-year validity.
  • BS-VI vehicles older than 10 years need a fresh PUC every six months, whether private or transport.
  • BS-IV certificates are valid for six months, while BS-I, BS-II and BS-III certificates are valid for three months.
  • Existing certificates continue until their original expiry; the new schedule applies at the first renewal after the amendment takes effect.

New PUC validity schedule

Vehicle age is counted from the date of first registration. For a used-vehicle buyer, that means the relevant date is the vehicle’s original registration date, not the date of purchase or transfer. The central schedule is as follows:

Vehicle categoryAge or emission standardPUC validity
All vehiclesBS-I, BS-II or BS-III3 months
All vehiclesBS-IV6 months
Private or non-transportBS-VI, up to 6 years3 years
Private or non-transportBS-VI, more than 6 to 10 years1 year
Private or non-transportBS-VI, more than 10 years6 months
TransportBS-VI, up to 6 years2 years
TransportBS-VI, more than 6 to 10 years1 year
TransportBS-VI, more than 10 years6 months

The schedule covers the main private-car, two-wheeler and commercial-vehicle cases readers are likely to encounter. The legal classification is based on the vehicle’s registration category, so an owner should use the category recorded in the RC and the PUC system rather than assume that every four-wheeler follows the private-vehicle row.

What changes for private car and bike owners

The biggest relief is for a BS-VI private vehicle that is still within six years of first registration. Its PUC certificate can be valid for three years at a time under the new schedule, instead of requiring an annual renewal. A BS-VI private vehicle that has crossed six years but not 10 years moves to annual renewal, and one older than 10 years moves to a six-month cycle.

That makes the vehicle’s age an important part of a PUC check. A five-year-old BS-VI car and a seven-year-old BS-VI car do not receive the same validity period even though both meet the same emission standard. The difference also applies to BS-VI two-wheelers and other non-transport vehicles covered by the rule.

Older standards have a shorter compliance cycle. BS-IV vehicles receive six-month certificates, while BS-I, BS-II and BS-III vehicles receive three-month certificates. Owners of older vehicles should therefore record the next expiry date after every test rather than rely on a previous annual-renewal habit.

What transport operators need to track

BS-VI transport vehicles have a separate schedule: two years up to six years from first registration, one year after six years and up to 10 years, and six months after 10 years. This distinction matters for taxis, buses, goods carriers and other vehicles used for transport, because applying the private-vehicle interval to a commercial vehicle could leave the vehicle without a current certificate.

For a fleet, the practical task is to map each vehicle’s first-registration date, emission standard, registration category and current PUCC expiry. The revised rule does not remove the requirement to carry a valid certificate issued or renewed by an agency authorised by the state government, and the certificate must be produced on demand to authorised officers.

What happens to an existing PUC

The amendment does not require every vehicle owner to retest immediately just because the schedule has changed. A PUC certificate issued before the amendment continues under its existing validity period; the revised period applies from the vehicle’s first renewal after the rules come into force.

The rules also clarify how the next certificate is dated. If renewal is completed within the 10 days before the existing certificate expires, the renewed certificate takes effect from the existing expiry date. If the certificate has already expired, the renewed certificate takes effect from the date of renewal. The second situation can therefore create a gap that is not backdated.

What to check now

  • Check the vehicle’s BS emission standard in the RC or existing PUC record.
  • Use the first-registration date to place the vehicle in the correct age band.
  • Confirm whether the RC classifies the vehicle as non-transport or transport.
  • Keep the existing PUC expiry date in view; the rule change alone is not an instruction to obtain an immediate fresh certificate.
  • At renewal, confirm that the authorised testing centre records the correct vehicle category, emission standard and validity end date.

For a document-focused checklist covering PUC checks and renewals, see the PUC certificate check and renewal guide. Before a longer drive, owners can also use the road-trip planner after checking that the vehicle documents are current. If fuel is part of the trip budget, the live fuel-price page provides a separate price check.

What to watch next

The schedule is central, but implementation happens through state-authorised testing centres and the PUC records issued to individual vehicles. Owners should check the validity printed on the certificate they receive and follow any state transport-department process updates. The main reader takeaway is simple: identify the vehicle’s emission norm and age first, then use the matching interval; do not assume that a BS-VI label alone means a one-year or three-year certificate.

Illustration: AI-generated emissions-testing scene for context; not a photograph of a specific government facility.

Sources